Standard schnable tip forearm for CPA Stevens single shot rifles. In most cases we will inlet the inside of the channel for a palm rest without drilling the holes through. Length is 10 5/8" long and attaching screw holes are at 7/8" and 6 1/8" from the frame.
This forearm is similar to the Stevens 2-screw style but is slightly wider and deeper for the larger CPA frame. You can certainly use this forearm on other makes, but let us know so we can leave extra wood for larger frames.
Be sure to enter the shape of your barrel as well as the diameter at the frame and at the end of the forearm. Please also note requests such as a special location for the attaching hole. In most cases we cannot make forearms without attaching holes.
Forearms are 98% shaped and inlet. For normal barrel contours, the inletting is typically within about .010", while we typically leave about .060" on the outside surfaces. If it is an unusual contour, we will leave extra wood.
These products are made to order at our shop in Pennsylvania. Delivery time is typically about a month.
Please visit the reference section of this website for information about our wood grades.